Beilstein J. Nanotechnol.2020,11, 167–179, doi:10.3762/bjnano.11.14
], irradiated [46], metal–semiconductor couples [42][47], etc.) can be thermally characterized to determine thermophysical properties, such as the thermal diffusivity and thermaleffusivity. At lower frequencies, the measurements are subject to 3D effects and necessitate a change in the laser beam shape. At low
PDF
Figure 1:
SEM images of a) G1, b) G2, c) G3, d) HDPE/G1 nanocomposite with 5.52 vol %, e) HDPE/G2 nanocomposi...
Beilstein J. Nanotechnol.2015,6, 529–536, doi:10.3762/bjnano.6.55
effusivity of the samples, from which, for the first time, the values of specific heat and thermal diffusivity of the samples were then calculated.
Keywords: Fourier transform infrared spectroscopy (FTIR); specific heat; thermal conductivity; thermaleffusivity; ZnS nanoparticles; Introduction
Over the
originating from chemical initiators [6].
The interest in measuring the thermal conductivity (k) and the thermaleffusivity (e) of nanofluids containing semiconductors has increased [15] because of their increasing use in devices [16]. The photoacoustic (PA) effect has been demonstrated to be a valid
–PVA at 50 kGy. In order to calibrate the set-up, the thermaleffusivity of distilled water and ethylene glycol were measured and found to be 0.160 and 0.082 (W·s1/2·cm−2·K−1), which perfectly agreed with the reported values of the literature [32][33][34]. The thermaleffusivity of distilled water, PVA